Figure 4-2: Atx Power Supply Enable Connector Location - IEI Technology PCIE-9452 User Manual

PCIE-9452 PICMG 1.3 CPU Card
3-pin wafer (1x3)
CN Type:
CN Location: See Figure 4-2
CN Pinouts: See Table 4-3
The ATX power supply enable connector enables the PCIE-9452 to be connected to an
ATX power supply. In default mode, the PCIE-9452 can only us an AT power supply. To
enable an ATX power supply the AT Power Select jumper must also be configured. Please
refer to Chapter 3 for more details.

Figure 4-2: ATX Power Supply Enable Connector Location

PIN NO. DESCRIPTION
1 GND
2 PS-ON
Page 43