Table of Contents
Advertisement
Figure 5-20: SATA Power Drive Connection
5.6.9 Wafer-to-PS/2 Cable (Keyboard/Mouse Installation)
The optional wafer-to-PS/2 cable respectively connects the onboard keyboard wafer
connector and the onboard mouse wafer connector to a PS/2 keyboard and a PS/2
mouse. To connect the wafer-to-PS/2 cable, please follow the steps below.
Step 1:
Locate the connector. The location of the keyboard/mouse connector is shown
in Chapter 4.
Step 2:
Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the PCIE-9452 keyboard or mouse connector. See Figure 5-21.
Step 3:
Insert the cable
the keyboard/mouse connector on the PCIE-9452, connect the cable connector
to the onboard connectors. See Figure 5-21.
Page 104
PCIE-9452 PICMG 1.3 CPU Card
connectors.
Once the cable connector is properly aligned with
Advertisement
Table of Contents
