Anti - Static Precautions; Installation Precautions - IEI Technology ITCS-100-H81 Us Er Manual

ITCS -100-H81 Em b e dd e d S ys te m
3.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the maintenance of the
ITCS-100-H81 may result in permanent damage to the ITCS-100-H81 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER series motherboard and the power module. (Dry climates are
especially susceptible to ESD.) It is therefore critical that whenever the ITCS-100-H81 is
opened and any electrical component handled, the following anti-static precautions are
strictly adhered to.

Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad: When configuring the ITCS-100-H81, place it on an
anti-static pad. This reduces the possibility of ESD damaging the
ITCS-100-H81.
3.2 In s ta lla tio n P re c a u tio n s
During installation, be aware of the precautions below:

Read the user manual: The user manual provides a complete description of
the ITCS-100-H81, installation instructions and configuration options.

DANGER! Disconnect Power: Power to the ITCS-100-H81 must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the ITCS-100-H81 is opened while the power cord is still
connected to an electrical outlet.
P a g e 13