Unpacking; Packing List - IEI Technology ITCS-100-H81 Us Er Manual

ITCS -100-H81 Em b e dd e d S ys te m
2.1 Un pa c kin g
To unpack the embedded system, follow the steps below:
S te p 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Open the external (second) box.
S te p 2:
Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
S te p 3:
internal (first) box.
Lift the system out of the boxes.
S te p 4:
Remove both polystyrene ends, one from each side.
S te p 5:
Make sure all the components listed in the packing list are present.
S te p 6:
2.2 P a c kin g Lis t
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
ITCS-100-H81 was purchased from or contact an IEI sales
representative directly by sending an email to sales@ieiworld.com.
P a g e 9