Restore Power To The Server; Return The Defective Power Supply - Avaya S8510 Manual

Job Aid: Replacing the power supply on the Avaya S8510 Server

Restore power to the server

To restore power to the server:
1. Connect the power cord to the power supply.
2. Route the power cord through the cable management arm or power cord anchor, if present.
3. Close the cable management arm, if present.
4. Connect the power cord to the power source.
5. Be sure that the power supply LED is green (Note 1 in
LEDs (bay 1 shown)
Return the defective equipment
To return the defective power supply:
1. Place the defective power supply in the protective packaging that accompanied the
replacement power supply.
2. Return the power supply to Avaya using the procedures established for your region.
64 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
on page 62.
Figure 18: S8510 power supply