Table of Contents
Advertisement
Figure 9: Remove/replace the hard drive on the S8510 server (bay 1 shown)
2
1
Figure notes:
1.
Pinch the two tabs of the drive
carrier release handle together.
2.
Open the carrier release handle.
2. Open the carrier release handle.
!
CAUTION:
Allow approximately 10 seconds between the time you release the carrier handle
CAUTION:
and unseating the drive (pulling it out of its slot). This allows the internal
mechanism to park the read/write heads so that the drive can be handled safely.
3. Pull the hard drive out of its bay.
4. Set the hard drive on the antistatic mat; you will return it to Avaya later.
Replacing either hard drive in the S8510 server
3
3.
Pull the hard drive out of its bay.
03-602953 Issue 1 June 2008
hw851d1r LAO 021308
39
Advertisement
Table of Contents
