Avaya S8510 Manual page 72

Job Aid: Replacing the SAMP on the Avaya S8510 Server
Figure 23: Removing/replacing the S8510 SAMP card
hw85smpr LAO 040308
Figure notes:
1. Press the release latches
on the PCI expansion
card riser.
2. Remove the cable from
the SAMP.
2. Disconnect the cable assembly from the SAMP (Note 2 in
you will not re-use the cable but will return it to Avaya with the SAMP.
3. Remove the defective SAMP card by pulling it gently out of the expansion slot in the riser
assembly (Note 3 in
4. Remove the ribbon cable from the motherboard (Note 4 in
72 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
2
3
4
3. Remove the defective SAMP from
the expansion slot.
4. Remove the ribbon cable from the
motherboard.
Figure 23).
1
Figure 23). Set the cable aside;
Figure 23).