Table of Contents
Advertisement
Job Aid: Replacing the Avaya S8510 dual network interface
Configure the dual NIC
To configure the Ethernet interface settings:
1. At the Maintenance Web Pages select Server Configuration > Configure Server.
2. Click Continue through the review notices until you get to the Configure Server page with
"Specify how you want to use this wizard" at the top.
3. Select Configure Individual Services and click Continue.
The wizard displays a new left-side navigation panel.
4. Select Set Identities.
The Set Server Identities page displays.
5. Ensure that the Ethernet ports are mapped as they were before replacing the dual NIC (see
Record Ethernet interface settings
6. If you need to change the mappings, click on Continue.
The Configure Ethernet Interfaces page displays.
7. Make any changes and click Change.
The status of the configuration update appears in the window.
8. When the update completes, the following message appears: Successfully
configured ethernet interfaces.
Test connectivity to the network
To test network connections from the server out to the network:
1. At the Web interface select Diagnostics > Ping.
The Ping screen displays.
2. In the Host Name or IP address field, type in the host name or IP address of a computer
on the network.
3. Click Execute Ping.
4. Verify that the ping was successful, indicating that the server is connected to the customer's
network.
5. If DNS is administered, type in the host name of a computer on the network.
6. Click Execute Ping.
7. Verify that the ping was successful, indicating that DNS is working.
54 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
on page 44):
Advertisement
Table of Contents
