Restore power to the server
To restore power to the server:
1. Connect the power cord to the power supply.
2. Route the power cord through the cable management arm or power cord anchor, is present.
3. Close the cable management arm, if present.
4. Connect the power cord to the power source.
5. Be sure that the power supply LED is green (Note 1 in
Figure 17: S8510 power supply LEDs
Figure notes:
1.
Power supply status indicator
2.
Power supply fault indicator
Return the defective equipment
To return the defective power supply:
1. Place the defective power supply in the protective packaging that accompanied the
replacement power supply.
2. Return the power supply to Avaya using the procedures established for your region.
Replacing the power supply in the S8510 with only one power supply
Gb
1 Gb
2
3.
Figure
17.
1
2
3
AC line status indicator
03-602953 Issue 1 June 2008
hw85pled LAO 050108
61