Remove The Defective Samp From The S8510 Server - Avaya S8510 Manual

Remove the defective SAMP from the S8510 server

!
CAUTION:
The SAMP has separate power source than the server's. You must remove all
CAUTION:
power from the server and the SAMP card before starting this procedure.
ELECTROSTATIC ALERT:
Take precautions against electrostatic discharge: wear a wrist strap connected to
ELECTROSTATIC ALERT:
an approved ground.
The SAMP card resides in a PCI expansion card riser at the rear of the S8510 server. To
remove the defective SAMP from the riser:
1. Lift the release latches on the PCI expansion card riser as shown in
replacing the S8510 SAMP card
Replacing the SAMP on the Avaya S8510 server
on page 72.
Figure 23: Removing/
03-602953 Issue 1 June 2008 71