Table of Contents
Advertisement
Job Aid: Replacing the Avaya S8510 dual network interface
Shutdown the S8510 server using either the Maintenance Web Pages or the manual Shutdown
button on the faceplate.
1. On the Maintenance Web Pages, select Server > Shutdown Server.
The Shutdown Server page displays.
a. Select the Delayed Shutdown option.
b. Uncheck the Restart server after shutdown checkbox.
c. Click Shutdown.
2. If you cannot access the Maintenance Web Pages, you can manually power down the
server by pressing the power button on the front panel (Note 1 in
Note:
The system's Advanced Configuration and Power Interface (ACPI) is disabled,
Note:
meaning that power is cut off immediately after pressing the power button.
Figure 10: Avaya S8510 front panel
1
2
III
Figure notes:
Power-on indicator, power button
1.
2.
Nonmaskable Interrupt (NMI) button
(disabled)
3.
System identification button (used to
locate equipment within the rack)
4.
LCD display (system ID, status
information, and system error
messages)
3. Continue only after the server has powered down and the power-on indicator light (Note 1 in
Figure
10) is out.
46 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
3
4
5
6
0
8
Figure
1
7
USB 2.0 connectors
5.
6.
Video connector (not used)
7.
Hard disk drives
8.
Slimline CD/DVD drive
10).
hw8510fn LAO 020108
Advertisement
Table of Contents
