Avaya S8510 Manual page 18

Job Aid: Replacing the Avaya S8510 server
Figure 5: Removing and replacing the dual NIC in the S8510
hw85nicr LAO 040308
Figure notes:
1. Press the release latch on the
PCI expansion card riser.
2. Grasp the dual NIC by its edges and carefully pull it straight out of the PCI expansion card
riser slot (Note 2 in
Install the dual NIC in the S8510 server
To install the dual NIC in the S8510 server:
1. Carefully grasp the NIC by its edges and position it so that the card-edge connector aligns
with the expansion-card slot on the PCI riser board (Note 2 in
2. Insert the card-edge connector firmly into the PCI expansion card riser until the card is fully
seated.
3. Close the PCI expansion card riser latch (Note 1 in
18 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
Figure 5).
2
2. Pull the dual NIC card straight out of
the slot.
Figure
Figure 5).
1 1
5).