Answering A Call - Uniden MER 9600C Manual

Condition
Line in Use
When communication is made
between the Base Unit and the
Handset, the screen will go to
"Standby", and the phone is ready to
use.
If the Handset is at the range limit of
the MER 9600C, you may see:
Take the following action:
Condition
Action

Answering a Call

If the Handset is in the Charger Unit:
1. When you receive a call, the
Handset rings and the LCD
will display a PBX message
showing information about the
call. Also, if one of the
Function Keys ( F ) is assigned
to a line, the LED for that key
flashes.
2. Pick up the Handset from the changing unit, this will activate the
AutoTalk feature that allows you to answer the call immediately.
—OR—
Press the talk or the flashing
F key. The next LCD display
you will see is:
Indicator
Error Tone
During a Call
Warning Tone
Move back in range within 20
seconds
LINE IN USE
In Standby Mode
Can't make or answer calls
(Phone may ring intermittently)
Move back within range.
A=OUTSIDE CALL1
02
26
LCD Display
talk
NO SERVICE
AQUIRING
LINK