Uniden MER 9600C Manual page 32

4. Press the chan key once
again to confirm you're entry.
You'll see:
Unlocking
1. Press and Hold the chan key
for one second while in
standby. A code input display
with the lock icon appears:
2. Enter the 2 digit number you
used to lock your phone with.
3. Enter the 2 digit lock code
and press chan . If the
number you entered was
correct, you will hear a "beep"
and the LCD display will
clear. The phone will go into
Standby mode:
4. If the 2 digit number you enter
was incorrect, you will hear a
error tone when you press
chan . The LCD display will
clear but the lock icon will
remain on as the phone goes
into Standby mode:
Note: Repeat steps 1-3 if you still wish to unlock the keypad of your
telephone.
32
lock
Enter 2 digits
Lock code=--
lock
Enter 2 digits
Lock code=78
lock
lock