Table of Contents
Advertisement
4) Press the OK soft key. You will hear a confirmation tone.
Note: Using the T-coil feature may shorten your battery's talk time, please set to off when not using this feature.
Finding a Lost Handset
To locate a misplaced handset, press [find hs] on the base when the phone is in standby. All handsets will beep for 60 seconds,
and PAGING appears on the handset display. To cancel paging, press any key on the found handset or [find hs] on the base.
Note: If the battery pack is completely drained, the handset will not beep when paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
1) During a call, press [int'com/hold] on the handset to place the caller on hold. If you leave a caller on hold for more than ten
seconds, the display screen will read, HOLD.
<<Insert illustration>>
2) To return to the party on hold, press
Note:
•
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party's line will be disconnected and the
phone will return to standby.
•
While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one handset, up to three people can participate in a conference call. A three-way conference call consists
of an outside line and two handsets. You can easily join a call already in progress.
<<Insert illustration>>
1) Press
or
[ / flash]
[
2) To hang up, return the handset to the cradle or press
Transferring a Call
You can transfer a call from one station to another.
1) During a call, press [int'com/hold] on the handset.
2) Use [up]
[down] to select the station you want to transfer the call to, then press the OK soft key.
or
The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer, press
initiating station.
3) When another station accepts the transferred call, you will be disconnected. If you want to rejoin the call, press
on the handset again.
[
]
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging. To accept the call
transfer:
1) Press
, [int'com/hold], or the ANSWER soft key from the handset.
[ / flash]
2) To speak to the caller, press
If you have multiple handsets, only the first handset to answer the transfer page will be connected to the call. If the transfer page
is not picked up within one minute, the operation will be canceled.
Page 17 of 23
[ / flash]
on the handset to join the call.
]
or
on the receiving handset.
[ / flash]
[
]
or
on a handset. The phone will return to the holding party.
[
]
on the handset. The other party will still be connected to the call.
[ ]
or
on the
[ / flash]
[
]
or
[ / flash]
Advertisement
Table of Contents
