Making A Call; Answering A Call; Call Transfers - Uniden XS 916 Quick Start Manual

Making a Call

After fully charging the handsets, remove the handset from the
extra charging cradle and place it on the main base. (The
LED will begin to flash indicating registration is occurring).
Wait for at least 5 seconds before removing the extra handset from
the main base.
The registration has been completed, and your dual handset
cordless phone is ready for use.
Pick up the handset and press
l
OR
Dial the phone number - then press
To hang up - press
l
OR
Place the handset on the Base Unit.

Call Transfers

TO TRANSFER CALLS
To transfer your call from handset 1 to handset 2:
Press .
l
transfer
The call is placed on hold on the first handset, while handset 2 begins to ring.
l
If the transferred
The call is transferred when the 2nd handset is answered.
call is not picked
Repeat the process to transfer the call back to handset 1. Calls can be transferred from either handset.
up after 5 minutes, l
the call will be
disconnected.

Answering a Call

Handset on the Base Unit:
l
Remove the handset from the base and
status
speak ( Auto Talk
Handset off the Base Unit:
l
Pick up the handset, press
To hang up - press
l
OR
Place the handset on the Base Unit.
. Dial the phone number
Page iv
).
and speak.