Using Your Handset - Uniden MER 9600C Manual

4. Press the chan key until the
F4 option is displayed on the
LCD.
5. Enter 0. The asterisk will go
out.
6. When you have configured all
the keys, press the talk key.
You will see:
The configuration is now
stored and the
MER 9600C returns to
Standby. At this point, you
can use the MER 9600C.

Using Your Handset

When you pick up the Handset and
press the talk key, you will see:
After the link has been made
between the Handset and Base, you
will see:
Then you'll see one of the following:
Condition
Line OK
No Connection to Base
Unit
Channel Busy
Indicator
talk Icon
Error Tone
Error Tone
25
PROGRAM
BTN F4 *
PROGRAM
BTN F4
CONFIG
COMPLETE
AQUIRING
LINK
talk
LCD Display
talk icon
NO SERVICE
SYSTEM
BUSY