Step 1 Check the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Customer Hotline. • Base unit Uniden Customer Hotline • Handset at 1-800-297-1023 (Mon •...
Deleting Information from the Caller ID List Making a Call from the Caller ID List Caller ID on Call Waiting (CIDCW) Changing the Digital Security Code Note on Power Sources General Information Troubleshooting Liquid Damage Precautions & Warranty I.C. Notice Index www.uniden.com...
If you have any trouble with your phone, call our Customer Hotline at 1-800-297-1023 (Mon - Fri 7 am to 7 pm, Sat/Sun/holidays -- except U.S. Thanksgiving and Christmas -- 9 am to 5 pm, CST). For more information on Uniden products and accessories, be sure to visit our web site: www.uniden.com Uniden is a registered trademark of Uniden America Corporation.
• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone. • CID - Caller ID • CIDCW - Caller ID on Call Waiting www.uniden.com C O N T R O L S A N D F U N C T I O N S 21. Base charging contacts 22.
Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the base as high as possible. • The base should be placed in an open area for optimum range and reception. www.uniden.com Avoid noise sources such as a window by a street with heavy traffic...
The battery recharges automatically when the handset is placed in the base unit. 1) Press down on the handset battery case cover (use the Use only the Uniden (BT-800) rechargeable finger indention for a better grip) and slide the cover battery pack supplied downward to remove.
• Connect the AC adapter to a continuous power supply. • Place the base unit close to the AC outlet to avoid long extension cords. www.uniden.com • • I N S T A L L I N G T H E P H O N E...
6) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. [ 12 ] I N S T A L L I N G T H E P H O N E www.uniden.com...
Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull both sides of the beltclip to release the tabs from the holes. www.uniden.com I N S T A L L I N G T H E P H O N E [ 13 ]...
Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headset may be purchased by calling Uniden's Customer Hotline or visiting the web site, see page 35.) [ 14 ] I N S T A L L I N G T H E P H O N E www.uniden.com...
3) Press the select key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to the base unit to complete the setting. The handset returns to standby mode. www.uniden.com B A S I C S E T U P [ 15 ]...
There's an easy way to tell: try making a call. If your call connects, your phone's setting is fine. If not, follow the steps below: [ 16 ] B A S I C S E T U P www.uniden.com...
2) The phone will sound the different ring tones at different volumes. To turn the ringer off, select 3) When the phone sounds the ring tone and volume you wish to use, press the end key. www.uniden.com If your phone system requires pulse dialing...
(AutoTalk is on.) Hanging up Press the end key or return the handset to the base. [ 18 ] U S I N G Y O U R P H O N E /tone/ , #/ or any www.uniden.com...
If the handset is off the base while an incoming call is ringing, simply press the end key to mute the incoming ring. The ringer will sound with the next incoming call. www.uniden.com You can only mute the handset ringer if the...
[ 20 ] U S I N G Y O U R P H O N E /tone/ key. Any digits you enter from then on will be sent appears on the display, indicating the phone is changing to another www.uniden.com...
3) To return to the original caller, press the talk/flash key again. You must subscribe to Call Waiting through your local telephone company. www.uniden.com U S I N G Y O U R P H O N E [ 21 ]...
5 seconds. This will reset the indicator. in order to use this feature. The voice mail company will provide you with the access number. [ 22 ] U S I N G Y O U R P H O N E www.uniden.com...
Page 24
U S I N G T H E S P E E D D I A L M E M O R Y key to move the cursor to the desired location. /tone/ or #/ /tone/ key to move the cursor to the incorrect character. Number of times key is pressed www.uniden.com...
Page 25
8) Press the end key to exit memory setup mode. The phone returns to standby. www.uniden.com U S I N G T H E S P E E D D I A L M E M O R Y [ 25 ]...
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to standby mode. www.uniden.com and the number selected U S I N G T H E S P E E D D I A L M E M O R Y...
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L WA I T I N G ) The date and time received Caller's name Caller's phone number ¨ ¨ www.uniden.com...
Uniden Customer Hotline for a replacement battery. Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone.
Page 34
Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish. [ 34 ] N O T E O N P O W E R S O U R C E S www.uniden.com...
5739.320-5746.130 MHz • To avoid damage to the phone use only Uniden AD-314 and BT-800 (or BT-905 having less usage time) with your phone. • If the handset is left off the base, the actual Talk Mode duration will be reduced respective to the amount of time the handset is off the base.
• Place the base unit away from appliances or metal objects. • Change the digital security code (see page 32). • Check the battery pack to ensure there is a secure connection. • Make sure ringer volume isn’t set to “off”. Suggestion www.uniden.com...
Page 37
• Contact your local telephone company to make sure that your telephone receives Voice Message Indication does • Reset the indicator by pressing and holding the find hs key for 5 seconds. not work. www.uniden.com wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. FSK message signaling.
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline at 1-800-297-1023. Action www.uniden.com...
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
...27 Storing names and numbers in speed dial memory ...23 T, U Technical information ...35 Tone dialing switch-over ...20 Traveling out-of-range ...20 Troubleshooting ...36 V, W, X, Y, Z Voice mail waiting indicator...22 Wall mounting ...12 Warranty ...40 www.uniden.com...
Page 43
At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. If you have any questions or problems, please do not return this product to the place of purchase. Having Trouble? Our customer care specialists are here to help you! Call our Customer Hotline at 1-800-297-1023 Mon - Fri 7 am to 7 pm, Sat/Sun/holidays (except U.S.