Answering A Call - Uniden XC 340 Operating Manual

Answering a Call
Youcan answeratelephonecall eitheratthe Handsetorthe Base Unit.YourXC 340
will ring at both locations (provided that both unit's ringers are switched ON) when
someone is calling your number.
To answer a call at the Handset:
1. If the Handset is not on the Base Unit, press TALK to answer the call.
-OR-
If the Handset is on the Base Unit, the Auto Talk function, allows you to
answer the call by simply lifting the Handset from the Base Unit and begin-
ning your conversation.
NOTE: Auto Talk function will not work if the Handset Ring ON/Baft Save
Switch is set to "Baft Save" position.
. After answering, you can place the call ON HOLD at any time by pressing
INT'C. You will hear a series of 3 beep tones while the call is holding.
To resume the conversation, press TALK.
. You may also transfer the call to the person at the Base Unit, if desired.
(See "Transferring a Call" later in this manual.)
2. When you have finished your conversation, place the Handset back on the
Base Unit. The Auto Standby functions automatically hang up the phone.
NOTE: If you don't place the Handset back on the Base Unit, press TALK
to hang up the phone.
NOTE: Sometimes when you press TALK to hang up the phone, you may
get an error tone and the phone will not disconnect. This may occur
during conversations under noisy conditions. If this happens, place
the Handset back on the Base Unit or press TALK again while
holding the Handset close to the Base Unit.
To answer a
call
at the Base Unit:
1. Press SPEAKER.
2. Speak into the microphone.
. After answering, you can place the call ON HOLD at any time by pressing
INT'COM. You will hear a series of 3 beep tones while the call is holding.
To resume the conversation, press INT'COM again.
. While on a call, you can switch to the Handset to resume the conversa-
tion, if desired. To do this, simply lift the Handset from the Base Unit and
continue your conversation. To switch back to the Base Unit, press
SPEAKER, and then place the Handset back on the Base.
. You may also transfer the call to the person at the Handset, if desired.
(See "Transferring a Call" later in this manual.)
18