Charging The Handset Battery Pack; Charging Spare Battery Packs - Uniden MER 9600C Manual

Charging the Handset Battery Pack

The rechargeable battery pack must be fully charged before using
your MER 9600C for the first time. (Note: Charge the Battery Pack
without interruption for 5 hours. )
1. Place the Handset in the front
slot of the Charging Unit.
2. Make sure the CHARGE 1
indicator lights. If the
CHARGE 1 light doesn't light,
check to see that the AC
Adapter is plugged in, and
that the Handset is making
good contact with the
Charging Unit charging
contacts.
The Charge 1 LED will remain on even when charging is complete.
Note:

Charging Spare Battery Packs

The Charging Unit of your MER 9600C is equipped with a Battery
Charger for charging a Spare Battery Pack.
1. Slide the Spare Battery Pack into the second slot in the Charging
Unit until the retaining clip snaps over the top of the pack.
2. Make sure the CHARGE 2
indicator lights. If the
CHARGE 2 indicator doesn't
light, check to see that the AC
Adapter is plugged in, and
that the Battery Pack is
making good contact with the
Charging Unit charging
contacts.
Note : Charge the Spare Battery Pack without interruption for 5
hours.
3. Charging is complete when the Charge 2 LED goes off
automatically.
19