Beckhoff EL6751 Documentation page 79

Parameterization and commissioning
Verify Configuration
Allows a comparison of the expected (entered) network configuration with the devices actually found in the
network. The data from the CANopen Identify Object are read and compared. In the case of Beckhoff boxes
the connected Bus Terminals or extension modules are read and compared (under preparation). This
function is possible only in Config mode.
Firmware
Shows the current firmware version of the EL6751.
Firmware Update... [FC510x only]
The firmware update is carried out via the associated hardware.
"ADS" tab
The EL6751 is an ADS device with its own net ID, which can be changed here. All ADS services
(diagnostics, acyclical communication) associated with the EL6751 device must address the card via this
NetID.
"Box States" tab
Fig. 93: "Box States" tab
Displays an overview of all current box statuses.
"(Online) DPRAM" tab
Refer to "Online display of DPRAM" in the System Manager documentation
CAN interface
Insert the "CAN interface" box directly behind the EL6151 device (see fig. Selection dialog "Inserting a box")
EL6751 Version: 3.5 79