Fig. 21 Structure Of Can Cable Zb5100 - Beckhoff EL6751 Documentation

ZB5100 CAN Cable
A high quality CAN cable with the following properties is included in Beckhoff's range:
• 2 x 2 x 0.25 mm² (AWG 24) twisted pairs, cable colors: red/black + white/black
• double screened
• braided screen with filler strand (can be attached directly to pin 3 of the 5-pin connection terminal)
• flexible (minimum bending radius 35 mm when bent once, 70 mm for repeated bending)
• characteristic impedance (60 kHz): 120 ohm
• conductor resistance < 80 Ohm/km
• sheath: grey PVC, outside diameter 7.3 +/- 0.4 mm
• Weight: 64 kg/km.
• printed with "Beckhoff ZB5100 CAN-BUS 2x2x0.25" and meter marking (length data every 20cm)
Fig. 21: Structure of CAN cable ZB5100
ZB5200 CAN/DeviceNet Cable
The ZB5200 cable material corresponds to the DeviceNet specification, and is also suitable for CANopen
systems. The ready-made ZK1052-xxxx-xxxx bus cables for the Fieldbus Box modules are made from this
cable material. It has the following specification:
• 2 x 2 x 0.34 mm² (AWG 22) twisted pairs
• double screened, braided screen with filler strand
• characteristic impedance (1 MHz): 126 ohm
• Conductor resistance 54 Ohm/km
• sheath: grey PVC, outside diameter 7.3 mm
• printed with "InterlinkBT DeviceNet Type 572" as well as UL and CSA ratings
• stranded wire colors correspond to the DeviceNet specification
• UL recognized AWM Type 2476 rating
• CSA AWM I/II A/B 80°C 300V FT1
• corresponds to the DeviceNet "Thin Cable" specification
EL6751 Version: 3.5
Mounting and wiring
29