Specifications; Traction Unit Specifications; Attachments/Accessories - Toro Reelmaster 7000-D Operator's Manual

Setting the Front and Rear Reel
Speeds
Although the front and rear reel speeds are calculated
by inputting the number of blades, mow speed and
HOC into the InfoCenter, you can manually change the
setting to accommodate different mowing conditions.
1. Scroll down to the F Reel RPM, R Reel RPM,
or both.
2. Press the right button to change the reel speed
value. As the speed setting is changed, the
display will continue to show the calculated reel
speed based on blade count, mow speed, and
HOC which was previously entered, but the new
value will also be displayed.

Specifications

Note:
Specifications and design are subject to
change without notice.

Traction Unit Specifications

Width of cut, 27-inch cutting
units
Width of cut, 32-inch cutting
units
Overall width, 27-inch cutting
units down
Overall width, 32-inch cutting
units down
Overall width, cutting units up
(transport)
Overall length
Height with ROPS
Track width, front
Track width, rear
Wheelbase
Net weight (with no cutting
units and no fluids)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro
delivers replacement parts designed to the exact
engineering specification of our equipment. For peace
of mind, insist on Toro genuine parts.
26
307 cm (121 inches)
320 cm (126 inches)
345 cm (136 inches)
358 cm (141 inches)
239 cm (94 inches)
370 cm (145.8 inches)
220 cm (87 inches)
229 cm (90 inches)
141 cm (55.5 inches)
171 cm (67.5 inches)
1574 kg (3470 lb)