Toro Reelmaster 7000-D Operator's Manual page 12

Figure 4
1. Hood latch
2. Remove the 2 rivets securing the hood-latch
bracket to the hood
Figure 5
1. Hood-latch bracket
3. Remove the hood-latch bracket from the hood.
4. While aligning the mounting holes, position the
CE lock bracket and the hood-latch bracket onto
the hood.
Note:
The lock bracket must be against the
hood (Figure 5).
Do not remove bolt and nut assembly from the
lock-bracket arm.
(Figure 5).
2. Rivets
1. CE lock bracket
g200373
5. Align the washers with the holes on the inside of
the hood.
6. Rivet the brackets and the washers to the hood
(Figure 6).
7. Hook the latch onto the hood-latch bracket
(Figure 7).
g012628
1. Hood latch
8. Screw the bolt into the other arm of hood-lock
bracket to lock the latch in position
12
Figure 6
2. Bolt and nut assembly
Figure 7
(Figure
g012629
g012630
8).