Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Greensmaster eFlex 2120 Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Traction Unit Specifications
Overall width
Overall height
Overall length (with basket)
Net weight (with 11-blade cutting unit
and grass basket)
Width of cut
Height of cut
Clip frequency
Electrical Specifications
Voltage
Current
Amp Hours
IP Rating

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
90.1 cm (35-1/2
inches)
104.8 cm (41–1/4
inches)
152.4 cm (60 inches)
132.9 kg (293 lb)
53.3 cm (21 inches)
1.5 to 7.5 mm (1/16
to 19/64 inches) with
Micro-Cut bedknife
Adjustable (refer
to Cutting Unit
Operator's Manual)
48 V
DC ( )
25.6 AH
IP65
for a list of all
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Shut off the machine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
machine quickly.
•
Check that operator-presence controls, safety
switches, and safety protective devices are
attached and functioning properly. Do not operate
the machine unless they are functioning properly.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Performing Daily
Maintenance
Perform the daily maintenance procedures; refer to
Daily Maintenance Checklist (page
18
33).