Specifications; Traction Unit Specifications; Attachments/Accessories - Toro Reelmaster 03781 Operator's Manual

Setting the Front and Rear Reel Speeds
Although the front and rear reel speeds are calculated by
inputting the number of blades, mow speed and HOC into
the InfoCenter, you can manually change the setting to
accommodate different mowing conditions.
1. Scroll down to the F Reel RPM, R Reel RPM, or both.
2. Press the right button to change the reel speed value. As
the speed setting is changed, the display will continue
to show the calculated reel speed based on blade count,
mow speed, and HOC which was previously entered,
but the new value will also be displayed.

Specifications

Note: Specifications and design are subject to change
without notice.

Traction Unit Specifications

Width of cut, 27-inch cutting
units
Width of cut, 32-inch cutting
units
Overall width, 27-inch cutting
units down
Overall width, 32-inch cutting
units down
Overall width, cutting units up
(transport)
Overall length
Height with ROPS
Track width, front
Track width, rear
Wheelbase
Net weight (with no cutting
units and no fluids)

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
25
307 cm (121 inches)
320 cm (126 inches)
345 cm (136 inches)
358 cm (141 inches)
239 cm (94 inches)
370 cm (146 inches)
220 cm (87 inches)
229 cm (90 inches)
141 cm (55.5 inches)
171 cm (67.5 inches)
1,574 kg (3,470 lb)