Toro Reelmaster 7000-D Operator's Manual page 46

Understanding the Warning
System
If a warning light comes on during operation, stop the
machine immediately and correct the problem before
continuing operation. Serious damage could occur if
you operate the machine with a malfunction.
Mowing Grass
Start the engine and move the engine speed switch
to the F position. Move the mow speed limiter to
AST
the M position. Move the PTO switch to the O
OW N
position and use the lift switch to control the cutting
units (the front cutting units are timed to lower before
the rear cutting units). To move forward and cut grass,
press the traction pedal forward.
Driving the Machine in Transport
Mode
Move the PTO switch to the O position and raise
FF
the cutting units to the transport position. Move
the mow speed limiter to the transport position. Be
careful when driving between objects so that you
do not accidentally damage the machine or cutting
units. Use extra care when operating the machine on
slopes. Drive slowly and avoid sharp turns on slopes
to prevent rollovers.
46