Toro Reelmaster 7000-D Operator's Manual page 25

Figure 32
2. In the S M
ETTINGS
scroll down to the P
the right button (Figure
Figure 33
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 33B and Figure
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 33D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
, use the center button to
ENU
M and press
ROTECTED ENU
33A).
33C). Repeat this step
Note:
Rotate the key switch to the O
then to the O
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
g028523
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O
feature.
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Blade Count
1. In the Settings Menu, scroll down to Blade Count
2. Press the right button to change the blade count
between 5, 8, or 11 blades.
Setting the Mow Speed
1. In the Settings Menu, scroll down to Mow Speed.
2. Press the right button to select mow speed.
3. Use the center and right button to select the
appropriate mow speed set on the mechanical
mow-speed limiter on the traction pedal.
4. Press the left button to exit mow speed and save
g028522
the setting.
Setting the Height of Cut (HOC)
1. In the Settings Menu, scroll down to HOC.
2. Press the right button to select HOC.
3. Use the center and right button to select the
appropriate HOC setting.
Note:
If the exact setting is not displayed, select
the nearest HOC setting from the list displayed.
4. Press the left button to exit HOC and save the
setting.
25
position locks the protected menu.
allows you to view and change the
position to enable and save this
N
position and
FF
hides the
N
FF