Specifications; Attachments/Accessories - Toro Reelmaster 3100-D Operator's Manual

Figure 34
1. Reel speed control
Backlap Control
The backlap control is located under the console cover
(Figure 34). Rotate the knob to R for backlapping and
to F for mowing. Do not change the knob position
while the reels are rotating.
Fuel Gauge
The fuel gauge (Figure
fuel in the tank.
Figure 35
1. Seat adjustment lever
2. Backlap control
35) registers the amount of
2. Fuel gauge
Seat Adjustment Lever
Move the lever
outward, slide the seat to the desired position, and
release the lever to lock the seat into position.

Specifications

Note:
Specifications and design are subject to
change without notice.
Transport width
Width of cut
Length
g011168
Height
Net weight*
Fuel tank capacity
Ground speed
* With cutting units and fluids

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
g008890
25
(Figure 35) on the side of the seat
203 cm (80 inches) in 183
cm (72 inches) width of cut
234 cm (92 inches) in 216 cm
(85 inches) width of cut
183 cm (72 inches) or 216 cm
(85 inches)
248 cm (93 inch)
193 cm (76 inches) with ROPS
844 kg (1,860 lb)
28 L (7.5 US gallons).
Mow: 0 to 10 km/h (0 to 6
mph); Transport: 0 to 14 km/h
(0 to 9 mph). Reverse: 0 to 6
km/h (0 to 4 mph)