Toro Reelmaster 7000-D Operator's Manual page 22

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics, and other information about the machine
(Figure 31) There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen, at any time, by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
Figure 31
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
•
Manual Fan Reversal—activated by pressing the
left and right buttons simultaneously.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
g020650
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
22
Indicates when scheduled service
should be performed
Hours remaining until service
Reset the service hours
Engine rpm/status—indicates the
engine speed
Info icon
Hour meter
Fast
Slow
Fan reversal—indicates when the fan
is reversed
Stationary regeneration required
Air intake heater is active
Raise cutting units
Lower cutting units
Operator must sit in seat
Parking brake indicator—indicates
when the parking brake is On
Identifies the range as High
Neutral
Identifies the range as Low
Coolant temperature—indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
Denied or not allowed
PTO is engaged