Star Micronics XB-2425 User Manual page 45

I
4.
5.
6.
7.
Openthe transparentpartof thefrontcover,andremovethepaperguide
and the rear cover.
Withthetractorcoversopen,mountthepaperby aligningholeswiththe
pins on the tractorunit.
Adjustthespacingofthetractorunitsbyslidingthemalongthebar,using
the clamp lever at the back of each unit to release and lock them in
position.Whenthe clampleveris up, theunitis released,andwhenit is
doti, the unit is locked.
Nowclosethetractorcovers,againmakingsurethatthepaperholesare
alignedwiththepinsonthetractorunits.If-hey arenotti-fied properly,
youwillhaveproblemswithpaperfeeding,possiblyresultingin tearing
andjammingof the paper.
Release lever
Figwu 4-8. Mountthe fanfoldpaperover the internaltractorunits.
8. Tumonthepowerusingthe switchlocatedatthefrontofthe printer.The
printerwill keep, indicatingthat the paper is not yet fully loaded.The
"PAPER OUT" messagewill also flashto confkn this.
9. Nowpnxsthe ~~1
button.Thepaperwillbe fedpasttheprint
head.
10.Turnoffthepower,andinstalltheoptionalPullTractorUnitasdescribed
in Chapter3.
11.Withthe optionaltractorcoversopen,turn theplatenknobclockwiseto
mountthe paperby aligningholeswith the pins on the optionaltractor
unit.