Loadingthepaper from the rear of theprinter
(Push feed)
You can load the fanfoldpaperwith the internalpush tractorunit.
1.
2.
3.
4.
5.
Placea stackof fanfoldpaperbehindandatleastonepage-lengthbelow
the printer.
Turn the printer'spower OFF.
Pushthereleaseleverbackward. T hishastheeffectofreleasingthepaper
from the platenroller,and engagingthe tractorfeed.
Removethe paperguideand put it asidefor the moment.
Openthetransparentpartof thefrontcover,andthe rearcoverusingthe
two gripson eithers;de, as in Figure4-3.
[
Release lever
Rear co~er
1
Figwu 4-3. Openingthe rear cover.
6. Pass the paper betweenthe printercase and the rear cover,
7. Withthetractorcoversopen,mountthepaperby aligningholeswiththe
pins on the tractorunit.
8. Adjustthespacingofthetractorunitsbyslidingthemalongthebar,using
the clamp lever at the back of each unit to release and lock them in
position.Whenthe clampleveris up, theunit is released,andwhenit is
down,the unit is locked.
30