Layoutparameters - Star Micronics XB-2425 User Manual

I
Layoutparameters
TheLayoutparametersamassignedto Bank"E",includingthesefunctions:
Multi-part
mode
You can use up to 3-plypaperwithnormalmode.If youwantto printon
4-ply or 5-plypaper, set the Multi-panmodeON.
Paper-outdetector
When this switch is OFF the printer ignoresthe paper-outdetectorand
printsdownto (and beyond)the bottomedge.Otherwiseleaveit ON.
AutomaticSheetFeeder
In orderto usethe optionalAutomaticSheetFeeder,set thisswitchto the
relatedposition.
Top marginsettingfor each papertype
Sets the first line positionon the eachpapertype.
Bottommargin
Sets the last line positionon the paper.
Linesper Inch
Sets how manylinesto be printedin one inch.
Followingtable shows the display messagesand those meaningsfor the
B@
6CE)S.
Display Message Meaning
El MULTI PART OFF
Multi-part mode is cancelled.
El
MULTIPARTON
Multi-part mode is selected.
I E2 PAPER-OUTOFF
I
Pimer-outdetector is disabled.
I
.
E2 PAPER-OUTON
Paper-out detector is enabled.
E3
ASF
OFF Optionat
ASF is not installed,
E3 ASF-SINGL ON
Single-Bin ASF is installed.
E3
ASF-DUAL ON
Duat-Bin ASF is installed.
E4
T.MGN-CUT 1/6
Top margin for cut forms is set to 1/6 inch.
E4 T.MGN-CUT 216
Top margin for cut forms is set to 2/6 inch.
E4 T. MGN-CUT 3/6 Top margin for cut forms is set to 3/6 inch.
E4
T.MGN-CUT 4/6
Top margin for cut forms is set to 4/6 inch.
I E4 T.HGN-CLJT 5/6 I ToDmar~inforcut forms issetto5/6 inch.
I
E4 T.MGN-CUT 6/6
Top margin for cut forms is set to 6/6 inch.
_=l
66