Replacing The Filter Pad - Barco ATLAS 67 CS4 User Manual

11.2.2 Replacing the Filter Pad

The filter pad must be replaced regularly. The operating period of a filter pad depends on the qual-
ity of the supplied air.
! Go to
standby mode
! For cooling down the lamp, wait 10 minutes.
! Switch off power by pressing
Switch off the equipment before replacing the filter pad in order to avoid severe
contamination!
! Lift the cover of the filter pad slightly and remove it.
! Remove the filter pad.
! Insert the new filter pad as indicated on its frame.
! Insert the cover of the filter pad and press it slightly down.
! Switch on power by pressing
! Switch on the lamp by pressing
R5976255 A CS4 (2001-03)
TLAS
by pressing on the
STDBY
.
0
.
1
or by applying 24V to the
standby
RCU
Removing the cover and the filter pad
24V interface
Figure 11-5
.
11-6