Control Unit; Power, Source And Communication Connections [3] - Barco ATLAS 67 CS4 User Manual

4.1 Control Unit

4.1.1 Power, source and communic ation connections [3]
1 Power switch
2 Power input
3 Video input
4 S-Video
5 SDI and SDO
6 IEE 13994
7 TRIG
8 Mouse
9 RS232 IN
10 RS232 OUT
11 Communication port
12 IR-Acknowledged
IR-Received
R5976255 A CS4 (2001-03)
TLAS
1 = on, 0 = off
autoranging from 100VAC to 240VAC
1 cinch or 1 BNC connector, no loop through
4-pin mini-DIN
2× BNC terminals, serial digital input and loop through
output
not yet implemented
(mini-jack) output voltage of 5V when projector is on
(DIN 13) mouse output to be connected to the mouse
input of a computer. The computer can now be con-
trolled via the Executive Remote Control Unit
(D9), to allow communication with external computer,
e. g. IBM PC or compatible, MAC ..
(D9), used to connect to next projector, RS232 IN plug
(D9), allows communication with the 800 peripherals
IR-Signals are recognized
IR-Signals are received but not recognized by the pro-
jector
4-2