Table of Contents
Advertisement
This remote control is used for source selection, control, adaptation and set up. It includes auto-
matic storing of the picture controls (brightness, sharpness ...) and the settings.
Other functions of the remote control are:
switching between standby and operational mode
!
switching to "pause" (blank picture, full power for immediate restarting)
!
direct access to all connected sources.
!
4.2.3 Terminology of keypad and R CU controls
1
Function keys
2
ADJ
3
Address key
4
Selection key
5
PAUSE
6
Standby
7
Mute
8
Help
9
Digit buttons
10
Audio controls
11
Picture controls
12
PHASE
13
Freeze
14
TEXT
15
ENTER
R5976255 A
CS4 (2001-03)
TLAS
have no function for this projector
ADJUST key, to enter or exit the adjustment mode.
(recessed key), to enter the address of the projector (between 0 and
9). Press the recessed address key with a pencil, followed by press-
ing one digit button between 0 and 9.
to direct access the zoom/focus/shift functions.
to stop projection for a short time, press 'PAUSE'. The image disap-
pears but full power is retained for immediate restarting.
stand by button, to start projector when the power switch is switched
on and to switch off the projector without switching off the power
switch.
Attention : Switching to Stand-by.
When the projector is running and you want to go to stand-by, press
the stand-by key for 2 seconds until the message 'Saving data, please
wait' is displayed. Do not press any longer on the stand-by key
otherwise the projector will restart.
to interrupt the sound reproduction.
on line help information (not yet available)
direct input selection.
use these buttons to obtain the desired sound level
use these buttons to obtain the desired picture analog level
used to remove the instability of the image.
press to freeze the projected image.
when adjusting one of the image, e.g. controls during a meeting, the
displayed bar scale can be removed by pressing 'TEXT' key first. To
re-display the bar scale on the screen, press 'TEXT' key again.
to start up the adjustment mode or to confirm an adjustment or se-
lection in the adjustment mode.
4-5
Advertisement
Table of Contents
