Table of Contents
Advertisement
8.3 Geometry
To start up the
Geometry
! Push the cursor key
! Press
to select.
ENTER
! The
geometry menu
The following adjustments are possible:
horizontal and vertical image shift.
horizontal and vertical image size
side keystone
blanking
aspect ratio
options
The following ways are possible to adjust a
! using the cursor key to adjust or
! entering the value with the digit keys. Therefore, press
enter the desired value with the digit keys. Press
8.3.1 Shift
The image can be shifted in a horizontal or vertical direction.
To start up the shift action:
! Push the cursor key
! Press
to select.
ENTER
! Push the cursor key
or
to shift the image in a horizontal direction. The default value for the shift is 0.
left
right
Shifting in a vertical direction: when the shift value is positive, the image is shifted upwards, when
the value is negative, the image is shifted downwards.
Shifting in a horizontal direction : when the shift value is positive, the image is shifted to the right,
when the value is negative, the image is shifted to the left.
8.3.2 Size
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size, the upper side of the image is fixed (table and ceiling mounted
configurations) and only the lower side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be
moved to its exact position.
R5976255 A
CS4 (2001-03)
TLAS
functions:
or
to highlight
up
down
will be displayed.
to shift the image in a horizontal or vertical direction
to adjust the size in a horizontal or vertical direction
to align the image (only necessary if the projector is
mounted at a non standard projection angle).
to frame the projected image on to the screen
to force the projector in a typical aspect ratio
to change the geometry options
geometry
or
to highlight
up
down
or
to shift the image in a vertical direction. Push the cursor key
up
down
.
'Geometry'
function:
to select the indicated value and
ENTER
to confirm the entered value.
ENTER
.
'Shift'
8-12
Advertisement
Table of Contents
