Replacing The Lamp Filter - Barco iD H250 Service Manual

5. Electronic spares and servicing procedures
Image 5-67
1: connectors to unplug
2: screws to remove
7. Remove the four screws fixing the LPS to the projector. See image 5-67
8. Take out the LPS
5.8.3

Replacing the lamp filter

Necessary tools
screwdriver Torx T10
How to replace the lamp filter
1. Remove the lamp cover
2. Remove the four screws fixing the lamp filter cover
Image 5-68
Lamp filter cover screws
3. Unplug the connectors as described below:
- J104: from the power box
- J105: to the LPS
62 R59770097 ID H250 / H500 15/05/2007