Table of Contents
Advertisement
To adjust
Custom Balance
! Push the cursor key
! Press
to select.
ENTER
! Push the cursor key
(range 0 to 2.5) in comparison with the green color (value 1).
8.2.3 Gamma
With the
gamma correction adjustment
image.
To change the gamma value :
! Push the cursor key
! Press
to select.
ENTER
! Change the
gamma
reached.
! Press
to return to the
EXIT
8.2.4 Decoding EBU/IRE
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the default American IRE standard
or via the European EBU standard. Decoding a NTSC signal using the European EBU standard
may result in a greenish tint.
! Push the cursor key
! Press
to toggle between
ENTER
! Press
to return.
EXIT
8.2.5 Dynamic Color Depth
Increases color contrast for all video and data sources.
To change the dynamic color depth value:
! Push the cursor key
! Press
to select.
ENTER
! Change the value by pushing the cursor key
reached: Adjustment range: 0 ... 8; default: 4
! Press
to return to the
EXIT
8.2.6 Noise Reduction
Reduces noise and pixel jitter in all video and data sources.
To change the noise reduction value :
! Push the cursor key
! Press
to select.
ENTER
! Change the value by pushing the cursor key
Adjustment range: 0 ... 8
! Press
to return to the
EXIT
R5976255 A
CS4 (2001-03)
TLAS
, handle as follows:
or
to highlight
up
down
or
to adjust red and push the cursor key left or right to adjust blue
up
down
, it is possible to accurately set the
or
to highlight
up
down
value by pushing the cursor key left or right until the desired value is
Picture Tuning menu
or
to highlight
up
down
or
.
EBU
IRE
or
to highlight
up
down
Picture Tuning menu
or
to highlight
up
down
Picture Tuning menu
.
'Custom Balance'
.
'Gamma'
.
.
'Decoding'
.
'Dynamic Color Depth'
or
until the desired color contrast is
left
right
.
'Noise Reduction'.
or
until the desired noise level is reached.
left
right
.
of the projector
gamma
8-9
Advertisement
Table of Contents
