Remote Control Unit (Rcu) - Barco G62 Series Installation Manual

1.6 Remote Control Unit (RCU)

Button identification
Button location
1
3
4
6
8
9
10
12
14
16
17
19
20
22
23
No. Button
1 ON
2 Standby
2
3 Number
4 Info
5 ID
6 Auto
5
7 Input
7
8 Enter
9 Arrow keys
10 Menu
11
11 Exit
13
12 Mode
15
13 Pattern
18
14 Brightness
15 Contrast
21
16 Lens shift H
17 Lens shift V
24
18 Focus
19 Keystone H
20 Keystone V
21 Zoom
22 Shutter
23 User1
24 User2
Function
Turn the projector on.
Turn the projector off.
Input numbers (0-9)
Display information on the source image.
Set the projector address.
Automatically synchronize the projector
to an input source.
Select an input source manually.
Confirm an selection.
Use arrow keys to navigate through the
menu or select the appropriate settings.
Show the main menu on the screen.
Back to previous menu.
Press to select the preset display mode.
Displays test patterns
Set the brightness of the image.
Set the contrast of the image.
Adjust the image position horizontally.
Adjust the image position vertically.
Adjust the image focus.
Adjust a horizontally keystone image.
Adjust a vertically keystone image.
Adjust the image size.
Momentarily turn off/on the screen (AV
Mute).
Press to assign custom functions. See
user guide for more info.
Press to assign custom functions. See
user guide for more info.
R5914654 /04
Introduction
G62 series 15