Type 8653
Pneumatic connection
10
cOnfiguraTiOn wiTh BürkerT
cOmmunicaTOr
The device can be configured at a PC using the "Bürkert Communicator" software.
The software can be downloaded free of charge from the Bürkert website.
In addition to the software, the "USB-büS-interface", available as an accessory, is required (see
chapter "16 Accessories").
The operating instructions for the basic functions of the software can be found on the Bürkert
website: www.burkert.com → Type 8920
10.1
User interface of the Bürkert Communicator
Menu bar
Navigation area
Configuration areas of
the device
Device
Fig. 13:
User interface Bürkert Communicator
Add interface
(connect to büS stick)
Application area
Menus
Detailed views
parameter Diagnostics Maintenance
english
25