Assembly; Fastening Types; Assembly On Wall - Burkert 8653 AirLINE Field Operating Instructions Manual

Type 8653

Assembly

7 assemBly
Warning
risk of injury due to incorrect assembly.
Assembly work should be carried out by fully trained personnel only.
►
Use suitable tools to perform assembly work.
►
The AirLINE Field Type 8653 field module is supplied as a fully assembled device. If defects are dis-
covered, the device must be replaced.
7.1

Fastening types

The body with IP65/67 protection eliminates the need for further protective housing such as a control
cabinet.
The device can be mounted on the following types directly in the process environment:
- Assembly on wall using the bracket
- Assembly on wall using the lateral fastening holes
- Assembly on standard rail using the bracket
7.2

Assembly on wall

Device with bracket
Fastening holes for sideways
assembly on wall
Fig. 8: Assembly on wall for AirLINE Field Type 8653 field module
Bracket
Bracket separately
Fastening holes for assembly on
wall using the bracket
Lever for unlocking the
device from the bracket
english
17