Type 8653
Pneumatic connection
10.4
Menu structure
10.4.1
Configuration area „Unit 1"
Menus
Detailed view "parameter"
Valve configuration
Fault handling
Diagnostics
Position feedback sensor
Detailed view "Diagnostics"
Channel maintenance
Channel fault
Detailed view "Maintenance"
Actuator
Pilot valve
Routine maintenance
Description
Basic settings of the device
Adjustment or modification of the base settings. The settings in
these menus may also be adjusted as described in section "10.3"
using the start-up wizard.
Type and method of operation of the pilot valves used
•
Action and state in the event of a fault
•
Settings for switching cycle counter for pilot valve/actuator
•
Specification of feedback source and fault detection
•
Channel diagnostics
Check each individual channel for maintenance requests or errors.
Maintenance settings
Reset the switching cycle counter for actuators and pilot valves
•
Set maintenance dates for the individual channels
•
english
27