8.1
Connecting the functional earth
Warning
Malfunctioning caused by electrostatic discharge.
Electrostatic discharge at the device may cause malfunctioning.
Assembly on wall: Depending on the installation situation, use a short cable with a large cross-section
►
to connect the device to the functional earth.
Assembly on standard rail: Depending on the installation situation, use a short cable with a large
►
cross-section to connect the standard rail to the functional earth.
Danger due to electromagnetic fields.
If the functional earth (FE) is not connected, the conditions of the EMC Law are not observed.
Assembly on wall: Depending on the installation situation, use a short cable with a large cross-section
►
to connect the device to the functional earth.
Assembly on standard rail: Depending on the installation situation, use a short cable with a large
►
cross-section to connect the standard rail to the functional earth.
8.1.1
Connecting the functional earth for assembly on wall
Fig. 10:
Earthing bolt on the rear of the device (shown without the bracket)
→
Use a short cable with a large cross-section to connect the earthing bolt M4 to the functional earth.
22
english
Type 8653
Electrical connection
Earthing bolt M4