Establishing A Connection Between The Device And The Bürkert Communicator; Create The Base Settings Of The Field Module - Burkert 8653 AirLINE Field Operating Instructions Manual

10.2 Establishing a connection between the device and
the Bürkert Communicator
→
Install the Bürkert Communicator software on the PC.
→
Set the load resistance (at the büS stick or external load resistance).
→
Use the büS stick to establish a connection between the device and the PC.
→
Start the Bürkert Communicator.
→
In the menu bar, click the icon
→
Select büS stick. Finish.
A connection is established between the device and Bürkert Communicator. The device is
displayed in the navigation area.
10.3

Create the base settings of the field module

→
Click on the + in the navigation area in front of the device name; the configuration sections of the device
will be displayed.
→
Select the configuration section General settings.
→
In the detailed application area
A start-up wizard will guide you through the base settings of the device.
26
for Add interface.
parameters, select the Set-up
english
Type 8653
Pneumatic connection
menu.