Removal - Burkert 8653 AirLINE Field Operating Instructions Manual

Type 8653

Removal

15 remOval
Danger
risk of injury from high pressure and discharge of medium.
Before working on the device or system, secure the actuators against moving.
►
Before working on the device or system, switch off the pressure. Vent or drain lines.
►
Warning
risk of injury from electric shock.
Before working on the device or system, switch off the power supply. Secure against reactivation.
►
Observe applicable accident prevention and safety regulations for electrical equipment.
►
risk of injury due to improper removal!
Removal should be performed only by trained personnel using suitable tools.
►
→
Undo the pneumatic connection.
→
Undo the electrical connection.
For assembly using the bracket
→
Push back the lever for unlocking the device and at the same time pull the device upwards out of the
bracket.
For assembly on standard rail
→
Push back the lever for unlocking the device and at the same time pull the device upwards out of the
bracket.
→
Using a slotted-head screwdriver, carefully turn the fastening screws on the bracket all the way
anticlockwise.
→
Tilt the bracket upward slightly and remove it from the standard rail.
english
41