General Safety Instructions And Information On Use; General Information; Purpose Of The Frequency Inverters - BONFIGLIOLI Vectron ACTIVE Manual

1
The present documentation was prepared with great care and it was subjected to
extensive and repeated reviews. For reasons of clarity, it was not possible to include
all details of all types of the product in the documentation. Neither was it possible to
consider all conceivable installation, operation or maintenance situations. If you re-
quire further information or if you meet with specific problems which are not dealt
with in sufficient detail in the documentation, contact your local BONFIGLIOLI agent.
We would also like to point out that the contents of this documentation do not form
part of any previous or existing agreement, assurance or legal relationship. Neither
are they intended to supplement or replace such agreements, assurances or legal
relationships. The manufacturer's obligations are exclusively specified in the relevant
purchase contract. This contract also contains all and any warranty regulations which
may apply to the relevant scope of supply. These contractual warranty provisions are
neither extended nor limited by the specifications contained in this documentation.
The manufacturer reserves the right to correct or amend the specifications, product
information and omissions in these operating instructions without notice. The manu-
facturer shall not be liable for any damage, injuries or costs which may be caused by
the aforementioned reasons.
1.1
Warning! The DC-link circuit of the frequency inverter is charged during operation,
1.2
Warning! The frequency inverters are electrical drive components intended for in-
05/08
05/08

General Safety Instructions and Information on Use

General Information

i.e. there is always the risk of contact with high voltage. Frequency in-
verters are used for driving moving parts and they may become hot at the
surface during operation.
Any unauthorized removal of the necessary covers, improper use, wrong
installation or operation may result in serious injuries or material damage.
In order to avoid such injuries or damage, only qualified staff may carry
out the transport, installation, setup or maintenance work required. The
standards EN 50178, IEC 60364 (Cenelec HD 384 or DIN VDE 0100), IEC
60664-1 (Cenelec HD 625 or VDE 0110-1), BGV A2 (VBG 4) as well as the
applicable national regulations must be complied with. The term „Quali-
fied Staff" refers to anybody who is familiar with the installation, assem-
bly, commissioning and operation of the frequency inverter as well as the
possible hazards and has the proper qualification for the job.

Purpose of the Frequency Inverters

stallation in industrial plants or machines. Commissioning and start of
operation is not allowed until it has been verified that the machine meets
the requirements of the EC Machinery Directive 98/37/EEC and EN 60204.
In accordance with the CE marking requirements, the frequency inverters
comply with the Low Voltage Directive 72/23/EEC as well as EN 50178 /
DIN VDE 0160 and EN 61800-2. The user shall be responsible for making
sure that the requirements of the EMC Directive 89/336/EEC are met.
Frequency inverters are only available at specialized dealers and are ex-
clusively intended for professional use as per EN 61000-3-2.
The frequency inverters are also marked with the UL label according to
UL508c, which proves that they also meet the requirements of the CSA
Standard C22.2-No. 14-95.
The technical data, connection specifications and information on ambient
conditions are indicated on the name plate and in the documentation and
must be complied with in any case. Anyone involved in any kind of work
at the device must have read the instructions carefully and understood
them before starting the work.
Modbus Instruction manual
Modbus Instruction manual
5
5