Spectrum Controls InView Series User Manual page 58

2-18 Chapter 2: InView System Connectivity
NOTE
User's Manual 0300277-02 Rev. C
Trigger Message and Broadcast Trigger Message
Trigger Message and Broadcast Trigger Message allows up to 64 messages
selected from the message list to be displayed after download. This is the
message queue. Each message is displayed for the amount of the pause time that
is set when the message is created.
Only messages of the highest priority are displayed. When using this
option, ensure that all the messages have the same priority.
If new messages are downloaded using this option, a clear message queue
command is done before the messages are downloaded. The old messages are
erased and replaced with the new ones. Broadcast Trigger Message downloads
the selected messages to all displays on the network
Clear Memory/Message Queue
These options are found under Tools then Clear Display Memory and Clear
Display Message Queue. The clear memory option erases the entire memory of
the display. Memory Cleared is displayed and then the display goes through a
reset cycle. The clear message queue option just erases the queue, not the display
memory. If there is a background message, it is displayed after a clear message
queue command has been issued.