Spectrum Controls InView Series User Manual page 109

InViewCtrl Methods
RemoveMessage
SingleMessage
UpdateVariable
UpdateVariableEx
SetTime
SetDate
ChangeDisplayAddress
ChangeDisplayBaudRate
ChangeDisplayIPAddress
ChangeDisplaySubnetMask
ChangeDisplayGateway
ClearBitmapTable
DownloadBitmaps
Chapter 5: InView Control and InView Control API
Description
Stops a message from running on the display.
Stops any currently running messages on the
display and run a single previously
downloaded message.
Updates the value of a single variable.
Updates the values of a range of variables.
Sets the time stored in the display.
Sets the date stored in the display.
Changes the address of the display.
Changes the display's communication rate.
Changes the display's IPAddress (part of the
TCP/IP protocol).
Changes the display's subnet mask (part of
the TCP/IP protocol).
Changes the display's gateway (part of the
TCP/IP protocol).
Clears the contents of the display's bitmap
table.
Downloads a range of bitmaps to the
display's sbitmap table.
User's Manual 0300277-02 Rev. D
5-3