Section 5.4 Properties; Section 5.5 Methods - Spectrum Controls InView Series User Manual

5-2 InView Control and InView Control API

Section 5.4 Properties

InViewCtrl Properties
ConnectMode
NetworkAddress
NetworkPort
SerialComPort
SerialBaudRate
SerialParity
SerialDataBits
SerialStopBits
DisplayAddress
PartitionSize
Heartbeat

Section 5.5 Methods

InViewCtrl Methods
Initialize
Close
Partition
ClearMessageQueue
ClearMemory
DownloadMessage
DownloadMessageEx
AddMessage
User's Manual 0300277-02 Rev. C
Description
Sets/Returns method by which the control
communicates with the display.
Sets/Returns IP address used to communicate with
the display.
Sets/Returns socket port used to communicate with
the display.
Sets/Returns serial port used to communicate with
the display.
Sets/Returns serial baud rate used to communicate
with the display.
Sets/Returns serial parity used to communicate with
the display.
Sets/Returns serial data bits used to communicate
with the display.
Sets/Returns serial stop bits used to communicate
with the display.
Sets/Returns the address being used to
communicate with the display.
Sets/Returns the maximum size (in bytes) per
message in the display.
Sets/Returns the use of a heartbeat while
communicating with the display.
Description
Establishes or re-establishes a connection
with the display.
Terminates a connection with the display.
Configures the maximum size per message
(and number of messages) in the display.
Turns off any messages running on the
display.
Clears all memory in the display and reset the
display.
Downloads a simple message to the display.
Downloads any type of message to the
display (Advanced Use Only).
Starts a previously downloaded message
running on the display.